 |
PARTS MOBILE
PM-1 (5 shelves, 2 trays, 8 hooks, 3 pegs)
PM-2 (3 shelves, 8 hooks)
- Organize the parts coming off and going onto the vehicle
- Saves time and trips to parts counter
- Equipped with trays for small parts, hooks and pegs for panels (hanging or laying)
- Five inch wheels rated at 250 lbs. each. Two fixed and two swivel wheels are featured
- 68" high x 48-1/2" wide x 22" deep
- 600 lbs. capacity with 200 lbs. per shelf
|
 |
 |
PAINT PREP
Model PP-01
- Tabletop workbench
- Access to 5 paper and/or sheeting rolls
- Easy paper reload
- Compact to fit between stalls
- Two removable parts trays
- Four cutting blades
- Four heavy-duty caster wheels
- Includes trash container
- Constructed of sturdy, industrial strength, 14-gage steel
- Powder-coated finish
- 23" deep x 54" wide x 53" high
|
|
 |
PAINTER'S WORKBENCH
Model PP-01
- Tabletop workbench
- Access to 5 paper and/or sheeting rolls
- Easy paper reload
- Compact to fit between stalls
- Two removable parts trays
- Four cutting blades
- Four heavy-duty caster wheels
- Includes trash container
- Constructed of sturdy, industrial strength, 14-gage steel
- Powder-coated finish
- 23" deep x 54" wide x 53" high
|
|
 |
FLEXI-WORK TABLE
FT-1
- Multiple position work table holds panels, doors, and hoods for efficient sanding, metal work, and painting
- Six angle positions, three height positions. Wire operated release pin
- Rubber coated pegs hold doors and bumpers allowing single worker installation - eliminates need to disconnect door wiring
- 30" x 38" table, 35" high
- 500 lbs. capacity tubular steel
|
|
| |
TRUCK BED DOLLY
Model TB-5000
Truck Bed Dolly allows
portable storage for truck
beds in addition to providing
an ergonomic working height needed for body work and painting.
- 40" wide x 60" long
- Adjustable heights - 25 1/2" and 31 1/2"
- Four caster wheels
- 1000 lbs. capacity
|
|
 |
VEHICLE WORK PLATFORM
VS1021
- Provides stable elevated support for working on large vehicles
- Each step has two non-slip strips for secure footing
- Easily folds for mobility and storage
 |
|
 |
VISE & GRINDER STANDS
VGF (Floor Mount)
VGW (Wall Mount)
- Vise and grinders buried in bench clutter can?t be used efficiently. Install swing out stands for maximum access and faster job completion
- Stands swivel and lock into multiple positions
- Job site grinding or clamping without requiring a work table
- Steel tube: 1-1/2" pipe
- Steel base plates: 8" x 8" x 1/4"
- Lag bolts are required
- 150 lbs. capacity
- 34" floor height
|
|
 |
WINSHIELD RACK
WR6000
- Organizes and safely stores windshields for easy access
- Saves floor space by mounting to wall
- Mounts in truck bed
- Features anti-slip surface for glass to rest on
- Each mast is covered with protective foam sleeve
|
|
 |
X STAND
Model FT-1
- Designed for the busy body shop
- Multiple shop uses
- 35" high x 30" wide x 40" long (except XT-200 measuring 33" high x 25" wide x 30" long)
- Adjustable to 43" high x 18" wide
- Folds for easy storage
- Polyfoam covers
- Steel tube with dual chains
- 500 lbs. capacity
|
|
| |
|
